Sortix 1.1dev ports manual

This manual documents Sortix 1.1dev ports. You can instead view this document in the latest official manual.

DEVELOPMENT(7)

Miscellaneous Information Manual

DEVELOPMENT(7)

NAME

development — operating system development instructions

SYNOPSIS

/src

DESCRIPTION

Releases come with the system source code in /src as a git(1) repository. It can be modified, compiled and installed on the current system. The source code is built with a make(1) build system. The source code can be located in any location, if so, simply substitute /src with the real location. These instructions only apply to building the operating system from within itself, those building it from another operating system needs to follow cross-development(7) instead.

If you are building a new version of the operation system where build tools have been added or changed, you first need to install the new tools. This is not needed when building the matching release. To do so, run as root:

    cd /src 
    make distclean            # fully clean build directory 
    make install-build-tools  # install new tools 
    make clean-build-tools    # clean for real build below

To build the base operating system and upgrade the current system, run as root:

    cd /src 
    make            # build new operating system in /src/sysroot 
    make sysmerge   # upgrade current operating system with /src/sysroot

The build system creates a minimal root filesystem structure in the /src/sysroot and builds each operating system component in turn, installing them into the sysroot. If the source code for ports are placed in /src/ports then they are automatically built as well. The result is a minimal system that can be turned into working system by adding important configuration such as passwd(5).

The sysmerge make target ensures a system is built in /src/sysroot and then runs the sysmerge(8) program which installs the new system files onto the existing system. It updates the system manifest as well all ports installed in the sysroot. The initrd(7) is automatically regenerated using update-initrd(8). The bootloader, if enabled in upgrade.conf(5), is reinstalled and configured as necessary. The new user-space is running on completion, though existing processes will be running the old programs. A reboot is needed to run the new kernel. If the ABI changed and the current kernel isn't able to run the new programs, then the upgrade is delayed and will be automatically completed on the next boot. The sysmerge-wait make target forces waiting until the next boot.

Root Makefile

The /src/Makefile handles the high level build of the operating system. The important targets are:

all: (default) Build each component in turn and install them into the sysroot.
build-tools: Make all build tools.
clean: Clean the component directories and the port source code. (clean-core, clean-ports)
clean-build-tools: Clean the directories of all build tools.
distclean: Run every clean target such that the source code is ready for distribution. (clean-builds, clean-core, clean-ports, clean-release, clean-repository, clean-sysroot)
install-build-tools: Install all build tools after making them.
iso: Create a release iso in the /src/builds directory after making all.
mostlyclean: Clean everything except binary packages. (clean-builds, clean-core, clean-ports, clean-release, clean-sysroot)
presubmit: Verify the coding style is followed (verify-coding-style), the manual pages does not have lints (verify-manual), the build tools compile (verify-build-tools), that everything compiles without warnings on all architectures (verify-build), and the system headers works in all supported configurations (verify-headers).
release: Make iso and construct release directory tree in /src/release suitable for online publishing.
sortix.iso: Make iso and place it in the current directory as sortix.iso.
sysmerge: Upgrade the current operating system using the sysroot after making the all target.
sysmerge-full: Like sysmerge but do a full operating system upgrade that uninstalls ports not present in the sysroot using --full.
sysmerge-full-wait: The combination of sysmerge-full and sysmerge-full-wait.
sysmerge-wait: Like sysmerge but delay the upgrade until the next boot using --wait.
sysroot-base-headers: Create the sysroot and install only the headers of the standard library and kernel into it. This is useful when bootstrapping the runtime libraries of the compiler that need to know about libc prior to building libc.

The important environment variables influencing the Makefile are:

BUILD: The platform of the current operating system. This defaults to the current machine and operating system.
HOST: Specifies platform on which the compiled code will run. This defaults to the current machine and operating system. This is used when cross-compiling the operating system. When cross-compiling the operating system, it must be set to one of i686-sortix and x86_64-sortix. This must be unset when building the build tools as they run on the current operating system. The compiler tools are prefixed with this variable if it does not match BUILD.
OPTLEVEL: Specifies compiler optimization options that gets added to CFLAGS and CXXFLAGS.
SORTIX_INCLUDE_SOURCE: Specifies whether the source code is included in the sysroot. This must be one of no, yes or git and defaults to git if git(1) is installed and yes otherwise.
SORTIX_ISO_COMPRESSION: Specifies the compression algorithm used in iso files. This must be one of none, gzip or xz and defaults to xz.

Components

The operating systems components, such as libc and the kernel, each have their own directory by that name. It contains a makefile that can build and install that component. This allows building and installing only that component onto the current operating system.

For instance, to build and install libc, run as root:

    cd /src/libc 
    make 
    make install

Note the individual makefiles only install the new system files and leak any files that don't exist anymore; and they also don't run any upgrade hooks to migrate the current system. This mechanism isn't supported unless you are building the same source code as the current operating system. The global sysmerge makefile targets should be used instead as the supported mechanism for operating system upgrades.

System libraries are statically linked and you will have to relink programs with the new library for changes to take effect. Building the whole operating system from the root makefile ensures components are built in the right order such that all programs use fresh libraries. The root makefile invokes component makefiles with SYSROOT set to /src/sysroot to force the compiler to locate files there. Likewise when installing, it sets DESTDIR to /src/sysroot to make it install files there.

Directories

In addition to the directories for each operating system component, there are these special directories:

/src/ports: If this directory exists, each subdirectory can contain the source code for a port that gets built along with the rest of the system.
/src/release: The release root makefile target creates this directory and populates it with a directory structure suitable for online publishing of a release.
/src/repository: If ports are present, this directory is made when binary packages are built and they are stored here. This works as a cache so ports don't have to be rebuilt every time the operating system is. Packages are also copied from here rather than the sysroot when making releases.
/src/sysroot: This directory is made when building the operating system and the freshly made files are installed here. The build system uses this as the system root which forces the compiler to look here for headers and libraries. This ensures a clean bootstrap where files from the current operating system do not leak into the new system.
/src/sysroot-overlay: If this directory exists, it is added to the initrd of the produced iso and can contain additional system files.

Build Tools

Some components are used to build the source code and must match the versions in the source code being built. These are currently:

carray
kblayout-compiler
mkinitrd
sf
tix

If the currently installed versions of those tools are older than the ones in the source code, you must update them. The clean-build-tools root makefile target cleans the applicable directories, the build-tools root makefile target builds them from the source code, and the install-build-tools root makefile target installs the new version. You must clean the compiled files from the source code afterwards because the compiled tools are intended to run on the current system, and have not been built properly using /src/sysroot.

Ports

You can place the source code for ports in srctix(7) format (has a tixbuildinfo(7) file) in the /src/ports directory and they will get built automatically when and installed into the sysroot when building the whole operating system. Installable binary packages are created in the /src/repository/$HOST directory using tix-build(8) directory and can be installed with tix-install(8). If an existing binary package exists in the repository, it is used instead of the building the port again.

Ports are currently made using cross-development(7) as not all ports can be built natively yet.

The ports system is described in detail in porting-guide(7).

Patches

The source code is managed as a git(1) repository and you can make your own changes and commit them. A good approach is to set up your own local development branch and work there:

    git checkout -b local 
    git add utils/hello.c 
    git commit -m 'Add hello(1).'

The presubmit makefile target can be used to verify your work needs some of the development conventions.

You can then easily prepare your a set of patches for upstream submission:

    git format-patch master..local

This will create a series of .patch files containing your changes. Review them and rewrite git history as needed until they are of submittable quality. You can then submit them for review at the official website.

To transfer files out of the operating system, you can either mount the local root filesystem from another operating system with networking, or you transmit the patches over the serial connection as described in serial-transfer(7).

Releases

CD-ROM release of the operating system can be built with the iso root makefile target. This will build the whole operating system, if not done already, and produce a bootable iso for the current architecture in the /src/builds directory. The sortix.iso root makefile target will do the above and place a sortix.iso file in the current directory.

The release root makefile target will run the iso target and prepare a /src/release directory with a directory structure and miscellaneous files suitable for a formal online release.

Following Development

The following-development(7) manual page documents what needs to be done to stay updated with the latest developments. You will need to read the new version of that document whenever you update the source code.